Last night’s models continued with the following trends:

QPF values continue to increase with each model run.  The current NAM (the NAM was excellent with our last snowfall) continues with almost 0.80 inches water equivalent.   All thermal parameters from the NAM FOUS data support precipitation as snow in PHL, and certainly north and west;   Areas to the north and west should be thermally colder, but will likely have somewhat less QPF values.

The only ‘piece of the puzzle’ less than perfect for snow is the 500 mb thickness level which suggests that the upper levels of the atmosphere are just a hair too warm.  But I’ve seen higher thickness levels support snow in March.

So a heavy, wet snow it is, unless the models change.

If this were a January snowstorm, or a storm at night,  we’d be talking about 8 inches of snow.  BUT, things play out differently during the daytime in March with the sun angle so high behind the clouds.  Accumulation on dark paved roadways is challenged and short-lived.  Temperatures at the surface will hover around 32.  So 4-6  inches is possible just outside of the city, mostly on grassy surfaces and shaded areas.  That amount is just a guess.  Frankly there are too many parameters here to accurately predict accumulations.  Any accumulations will rapidly melt in our next day of sunshine.